Electricity Usage Consumption Power Meter Socket

The LCD displays an overload warning. When the whole power exceeds the rated power display, the LCD will display "overload", give a loud noise warning to the user, and automatically disconnect the power supply. Our watt meter uses kilowatt hour as the unit to calculate power consumption through Watt, current, voltage, frequency and power factor. It can measure various parameters and cumulative kilowatt hours. It is very suitable for energy consumption monitor.

WARNING!

Do not plug two or more meters together!

IMPORTANT

Don't plug in an appliance where the load exceeds 16 Amp. Always ensure the plug of any appliance is fully inserted into the meter outlet. If cleaning of the meter is required, remove from mains power and wipe meter with a dry cloth.

KEYBOARD DEFINITION

1). SET: Set price with button UP.

2). MODE: Exchange display state.

3). UP: Set price combined with button SET.

GENERAL FEATURES

1).Display line power.

2).Display and memory accumulative total power quantity.

3).Display and memory total power charge of price.

THE DATA DISPLAY

Press MODE button the data displays as follows:

W →KWh  →PRICE →COST/KWH

↑_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _↓

1). Plug in socket and power on, the meter will display real power.

2). Press MODE button once again and release, the meter will display accumulative KWh.

3). Press MODE button once again and release, the meter will display total power charge.

4). Press MODE button once again and release, the meter will display COST/KWH.

SETTING PRICE OF COST/KWH

1). Press SET button during display COST/KWH,the first digital COST/KWH flash, press UP button to set it.

2). Press SET button once again and release, the second digital COST/KWH flash, press UP button to set it.

3). Press SET button once again and release, the third COST/KWH flash, press UP button to set it.

4). Press SET button once again and release, the fourth COST/KWH flash, press UP button to set it.

5). Press SET button once again and release, the radix point COST/KWH flash, press UP button to set it.

DATA CLEAR

Press and hold MODE button for 5 seconds will clear KWH,PRICE and COST/KWH data.